# 如何恢复出厂设置

 让软路由恢复到初始状态，需要借助一台显示器或者电视机，一个键盘。一根HDMI线

1、将软路由HDMI接口连接好显示器

2、在软路由上接上键盘。（注意不需要鼠标）

3、给软路由通电，然后观察屏幕反应，进入了openwrt屏幕显示，按回车，进入命令行模式

![](/files/qc699hcdV2h1B0mdthap)

![](/files/Q5thMUbVV6KJ7ATctLwC)

如图所示已经进入了命令行编辑状态，接下来输入firstboot 回车，然后输入y回车

![](/files/raHTM7D4RdPbTFElRy2a)

这样就代表重置完成✅了。我们断电重启，重新接好网线 就OK啦👌！


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://didiboy0702.gitbook.io/ruan-lu-you-shi-yong-zhi-nan/ru-he-hui-fu-chu-chang-she-zhi.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.